Dozer Pro
- Automatic and manual blade-control modes for compatible bulldozers
- RTK GNSS positioning with real-time blade-position and orientation feedback
- CAD design import and on-site slope, depth and elevation setup
- 10.1 in / 256.5 mm display with 1920 × 1200 resolution and live 3D visualization
- Core System, RTK Ready and Turnkey packages with different hydraulic and installation inclusions
- 2-Year Free Warranty
- After-Sales Support, 7 Days a Week
Ships in 24h
Extend to 5
Available add-on
Dozer Pro
Dozer Pro brings the design surface and the dozer blade into the same control process. GNSS positioning establishes the machine’s location, IMU sensors track blade orientation, and the controller adjusts the blade through a compatible machine interface. The operator follows the work on the in-cab display while grading toward the required elevation and slope.
Built on the FJD DC100 platform, this 3D dozer control system supports road construction, site preparation, mining infrastructure and large earthmoving projects. Crews can import a compatible CAD design or define slopes, depths and elevations on site. Automatic and manual modes allow blade operation to suit the stage of work and the installed control interface.
The system is offered in three CANAMEK packages, each with a base station. The packages differ in their hydraulic valve and installation inclusions. Selecting the package therefore starts with the dozer’s existing controls, the required integration and who will complete the installation.
Complete Design-to-Grade Workflow
Dozer Pro uses the project model as the reference for grading. Positioning and sensor measurements show where the blade is working, and the control system uses that information to follow the design.
- Install and configure the system. Match the GNSS layout, sensors, control interface and electrical connections to the dozer. Complete the required machine and blade calibration.
- Establish RTK positioning. Configure the compatible radio or network correction link and verify the machine’s position against the project reference.
- Prepare the design. Import a supported DXF, LandXML or DWG file, or define the required slopes, depths and elevations on site. Select the matching coordinate system.
- Review the target surface. Check the design and the live machine information on the terminal before starting automatic operation.
- Grade with the selected control mode. In automatic mode, the system adjusts blade position through the installed interface. Manual mode gives the operator direct blade control when required.
- Monitor the result. Use the live 3D view and task visualization to follow the work. Where configured, the Digital Construction platform supports project dispatch and remote review of machine status and progress.
Automatic blade control assists the grading operation. The operator continues to drive the dozer, manage material and supervise the work.
Choose the Dozer Pro Package
Core System
The Core System combines the Dozer Pro control system with a base station.
Choose this configuration when the required machine interface and installation arrangements will be specified separately. Automatic operation requires a compatible, completed blade-control installation.
RTK Ready
The RTK Ready package adds a hydraulic valve to the system and base station. It provides the valve hardware for a compatible hydraulic installation, with installation arrangements handled separately.
The valve and machine interface must suit the dozer’s hydraulic and electrical configuration. Package selection alone does not establish compatibility with every machine.
Turnkey System
The Turnkey System includes the system, base station, hydraulic valve and product installation. It suits buyers who want the equipment and installation supplied through the same package.
Confirm the machine details and installation scope with CANAMEK when ordering so the package is configured for the intended dozer.
| Package | Base Station | Hydraulic Valve | Product Installation |
|---|---|---|---|
| Core System | Included | Not listed as included | Not listed as included |
| RTK Ready | Included | Included | Not listed as included |
| Turnkey System | Included | Included | Included |
Machine Interface and GNSS Layout
The DC100 platform supports dual-mast and mastless layouts. Its control-interface options include valve, relay and CAN bus solutions for supported hydraulic and electro-hydraulic machines.
The available layout and interface depend on the machine and purchased configuration. CANAMEK matches these elements to the installation. The mastless layout moves the positioning installation away from blade-mounted masts to improve the view from the cab.
Automatic Blade Control
Dozer Pro compares live blade-position information with the required 3D surface. The controller then commands the compatible blade-control interface to adjust the blade as the machine grades.
GNSS positioning supplies the location reference. IMU measurements provide orientation information, and the control algorithm combines these inputs with the design. In a hydraulic valve installation, electro-hydraulic proportional control translates the command into the required blade movement.
The operator can select automatic or manual operation. Automatic mode supports continuous correction toward the design; manual mode is available when direct blade operation is needed. This reduces the amount of repeated manual blade adjustment required during compatible grading work.
GNSS Positioning and IMU Feedback
The DC100 positioning platform provides 1408 GNSS channels, and the CANAMEK specification lists support for GPS, GLONASS, Galileo and BeiDou. Radio or network RTK supplies the correction reference for high-accuracy positioning.
CANAMEK lists positioning accuracy in the ±0.79–1.18 in / ±2–3 cm range. The DC100 brochure specifies ±1.18 in / ±3 cm integrated positioning accuracy. These values describe the published positioning performance; the finished surface also depends on corrections, calibration, site conditions, machine response and operation.
The IMU has a specified resolution of less than 0.01° and an output frequency of up to 100 Hz. It supplies frequent orientation updates so the controller can account for blade movement during grading. Sensor resolution and positioning accuracy are separate specifications.
CAD Import and On-Site Surface Setup
The DC100 software supports DXF, LandXML and DWG design files. This allows a prepared project design to become the reference for the grading operation.
For work that can be defined directly at the machine, the operator can create slopes, depths and elevations on site. The platform also supports more than 6,000 EPSG coordinate systems and custom presets, allowing the project reference to be matched to local requirements.
Before grading, the design, coordinate system and positioning reference must agree. Once configured, the operator can work from the selected surface while viewing the machine’s relationship to it.
Real-Time 3D Guidance and Task Visualization
The terminal displays live 3D guidance and construction results. This gives the operator a view of the grading task while the automatic control system works toward the target surface.
The display measures 10.1 in / 256.5 mm and provides 1920 × 1200 resolution. Its rated brightness is approximately 219 foot-lamberts / 750 cd/m². An octa-core 2.2 GHz processor, 8 GB RAM and 128 GB storage support the terminal’s project and display functions.
The practical value is immediate feedback. The operator can see how the work relates to the design and respond when the task, material or site conditions require attention.
Hydraulic and Electronic Machine Integration
Dozer Pro uses a compatible interface to connect the control system with the blade. The CANAMEK page specifies electro-hydraulic proportional control, while the DC100 platform also offers relay and CAN bus integration for supported machines.
The published DC100 hydraulic valve is rated at 5.28 US gal/min / 20 L/min, 725 psi / 50 bar, and 24 V DC. These are specifications for that control valve. They are not ratings for the dozer’s complete hydraulic system.
Machine selection must account for the valve circuit, available electrical supply and supported control arrangement. The hardware and calibration are then configured around that installation.
Maintain the Required Grade with Fewer Manual Corrections
A dozer operator must continually balance blade position, machine movement and the material being pushed. When the blade drifts from the intended profile, the area may require another pass or additional material correction.
Automatic blade control uses live positioning and the design surface to make the required adjustments. This can help maintain a more consistent grade and reduce avoidable corrective work. Results depend on the quality of the reference model and the installed system’s calibration and response.
Reduce Unnecessary Material Movement
Overcutting or placing material above the required surface can increase the work needed to finish an area. A digital target gives the control system a defined reference throughout the grading task.
Following that reference can help reduce unnecessary removal, replacement and reshaping of material. The amount of corrective work avoided depends on the material, grade requirements and site conditions.
Software, Connectivity and Remote Support
The terminal supports 4G LTE, 2.4 GHz Wi-Fi and Bluetooth 5.0 with BLE. The control box provides Wi-Fi, Bluetooth and Ethernet communication. The DC100 platform also uses a built-in radio for compatible correction workflows.
The manufacturer documents cloud diagnostics and over-the-air updates. Its Digital Construction platform supports project planning and dispatch, with remote access to machine status and team progress. These connected functions depend on the installed software, service configuration and an available connection.
CANAMEK provides technical assistance through its Support & Service team, including email, telephone, WhatsApp and remote desktop where appropriate. Software licences, cloud-service access, correction subscriptions and mobile data should be specified in the quotation.
Solutions for Dozer Grading and Earthmoving
Dozer Pro is intended for construction work that requires the blade to follow a defined elevation, slope or 3D model. Documented applications include:
- Road subgrade construction
- Mining roads and associated infrastructure
- Airport and port earthworks
- Industrial-site grading
- Park and campus construction
- General construction-site preparation and large earthmoving projects
For agricultural land-leveling and drainage-design workflows, review TOPO-dozer. Its published functions include field surveying and surface design. Choose between the systems according to the project workflow, machine configuration and required data functions.
Commercial Package Benefits
The three packages let the buyer select the required level of hydraulic hardware and installation support. A base station is included in every package. RTK Ready adds the hydraulic valve, while Turnkey includes the valve and product installation.
Dozer Pro includes a 2-year warranty, and CANAMEK provides after-sales support seven days a week. The equipment, machine interface and installation scope can be reviewed together before the order is placed.
This package structure is useful when an existing fleet has different integration requirements. A machine with a suitable control arrangement may need a different installation scope from one requiring additional hydraulic hardware.
Key Features at a Glance
- FJD DC100-based 3D dozer control platform
- Automatic and manual blade-control modes
- GNSS positioning with IMU orientation feedback
- 1408-channel positioning platform
- GPS, GLONASS, Galileo and BeiDou support
- Compatible radio and network RTK correction workflows
- Real-time 3D visual guidance and task visualization
- DXF, LandXML and DWG design-file support
- On-site slope, depth and elevation setup
- More than 6,000 EPSG coordinate systems and custom presets
- Platform support for dual-mast and mastless layouts
- Valve, relay and CAN bus interface options for supported installations
- 10.1 in / 256.5 mm, 1920 × 1200 operator display
- Octa-core 2.2 GHz processor, 8 GB RAM and 128 GB storage
- 4G LTE, Wi-Fi, Bluetooth and Ethernet across the applicable components
- Cloud diagnostics and OTA updates with the required service configuration
- Core System, RTK Ready and Turnkey package choices
- 2-year warranty and after-sales support seven days a week
Why Choose Dozer Pro?
Dozer Pro connects the design model, positioning sensors and blade controls in one grading workflow. The operator can see the task while the system adjusts the blade toward the required surface.
For roadwork contractors: Digital design import and automatic blade control support construction of the planned subgrade and slopes.
For site-development crews: On-site surface setup and live 3D feedback support grading across industrial sites, parks, campuses and other construction areas.
For mining and infrastructure contractors: GNSS positioning and machine-integrated blade control provide a consistent reference for roads and large earthmoving areas, with package choices that account for the installation requirements.
Frequently Asked Questions
What is Dozer Pro?
Dozer Pro is a 3D dozer control system built on the FJD DC100 platform. It combines GNSS positioning, IMU sensors, an operator terminal and a compatible machine interface to control blade position against a digital design.
How is Dozer Pro different from TOPO-dozer?
Dozer Pro is presented as a DC100-based construction machine-control system with CAD design import, 3D visualization and automatic blade control. TOPO-dozer is presented around agricultural land leveling, field surveying, surface design and drainage workflows. Selection should reflect the project requirements, machine interface and required software functions.
Which Dozer Pro packages are available?
The packages are Core System, RTK Ready and Turnkey System. Core System includes a base station. RTK Ready includes a base station and hydraulic valve. Turnkey System includes a base station, hydraulic valve and product installation.
Is a base station included?
Yes. Core System, RTK Ready and Turnkey System each include a base station. Its model, radio configuration and accessories should be specified in the quotation for the selected system.
Which packages include the hydraulic valve and installation?
RTK Ready and Turnkey System include the hydraulic valve. Turnkey System also includes product installation. For Core System, the required machine interface and installation arrangements are specified separately.
Can the Core System provide automatic blade control without the listed valve?
Automatic operation requires a compatible machine-control interface. The DC100 platform supports valve, relay and CAN bus solutions for supported installations, but the correct interface depends on the dozer. Confirm the required integration before selecting Core System.
Does Dozer Pro automatically control the blade?
Yes. In automatic mode, the system uses the design model and live positioning and sensor information to command blade adjustments through the installed interface. Manual blade control is also available.
Does automatic blade control make the dozer autonomous?
No. The documented automatic function controls the blade for grading. The operator continues to drive the dozer, manage material and supervise the work.
How accurate is the positioning system?
CANAMEK lists positioning accuracy in the ±0.79–1.18 in / ±2–3 cm range, while the DC100 brochure specifies ±1.18 in / ±3 cm integrated positioning accuracy. Finished grading results also depend on corrections, calibration, machine response, site conditions and operation.
Which satellite systems does Dozer Pro support?
The CANAMEK specification lists GPS, GLONASS, Galileo and BeiDou. The manufacturer’s DC100 brochure specifies a 1408-channel GNSS positioning platform.
What do the IMU sensors do?
The IMU sensors provide orientation information for blade positioning and control. The DC100 IMU is specified with resolution below 0.01° and an output frequency of up to 100 Hz. Those sensor values are separate from overall positioning and grading accuracy.
Can I import an existing project design?
Yes. The DC100 platform supports DXF, LandXML and DWG design files. The file contents, coordinate system and positioning reference must be suitable for the installed software and project.
Can I set up a grading surface at the machine?
Yes. The platform supports on-site setup of slopes, depths and elevations. It also supports more than 6,000 EPSG coordinate systems and custom presets for matching the project reference.
Does Dozer Pro support both dual-mast and mastless installations?
The DC100 platform supports both layouts. The suitable layout and supplied mounting equipment depend on the dozer and purchased configuration, so the installation arrangement should be specified with CANAMEK.
Will Dozer Pro fit my bulldozer?
The system supports compatible bulldozers, but fitment must be checked for the specific machine. Provide the make, model, blade arrangement, existing control interface and electrical and hydraulic details so the installation can be specified correctly.
Can it use radio and network RTK corrections?
Yes. CANAMEK lists radio and network RTK data links. The correction source, radio configuration or network service must be compatible with the installed equipment and available at the jobsite.
What electrical supply does the equipment require?
The DC100 terminal requires 7–30 V DC. The control box and IMU require 9–36 V DC, while the hydraulic valve is rated at 24 V DC. Each component must receive the supply specified for the installed configuration.
What are the hydraulic valve ratings?
The supplied DC100 hydraulic valve is rated for 5.28 US gal/min / 20 L/min, approximately 725 psi / 50 bar, and 24 V DC. These values apply to that control valve, and the integration must suit the dozer’s hydraulic circuit.
What display is supplied with the DC100 platform?
The terminal has a 10.1 in / 256.5 mm display with 1920 × 1200 resolution and brightness of approximately 219 foot-lamberts / 750 cd/m². It uses an octa-core 2.2 GHz processor with 8 GB RAM and 128 GB storage.
What dust and water protection ratings are specified?
The control terminal is rated IP68. The control box, IMU and hydraulic valve are each rated IP67. The valve is included in RTK Ready and Turnkey System.
What operating temperatures are specified?
The DC100 terminal is rated for −4°F to +140°F / −20°C to +60°C, and the control box for −40°F to +140°F / −40°C to +60°C. The IMU is rated for −40°F to +185°F / −40°C to +85°C, and the GNSS antenna for −49°F to +185°F / −45°C to +85°C. Each component’s limits apply to the installation.
Does the system support remote diagnostics and software updates?
The DC100 platform supports cloud diagnostics and OTA software updates with the required connection and service configuration. Its Digital Construction platform also supports project planning, dispatch and remote review of machine status and progress.
Are software, cloud services and correction subscriptions included permanently?
Permanent software ownership and recurring service terms are not specified on the Dozer Pro page. Confirm the licences, cloud-service access, correction arrangements and mobile data terms in the quotation.
What types of projects is Dozer Pro intended for?
Documented applications include road subgrades, construction-site grading, industrial sites, mining roads and infrastructure, airport and port earthworks, parks, campuses and large earthmoving projects.
What warranty and after-sales support are available?
Dozer Pro includes a 2-year warranty. CANAMEK provides after-sales support seven days a week, with technical assistance through channels including email, telephone, WhatsApp and remote desktop where appropriate.
Full data sheet
| Choose | Core System | RTK Ready | Turnkey System |
System and Packages
| Specification | Value |
|---|---|
| Product | Dozer Pro |
| Product SKU | CNMK-DP-1040 |
| Platform | FJD DC100 |
| System type | 3D dozer automatic blade-control system |
| Machine category | Compatible bulldozers; fitment depends on the machine and control interface |
| Operating modes | Automatic and manual |
| CANAMEK-listed positioning accuracy | ±0.79–1.18 in / ±2–3 cm |
| DC100 brochure positioning accuracy | ±1.18 in / ±3 cm |
| GNSS channels | 1408 |
| Satellite systems listed by CANAMEK | GPS, GLONASS, Galileo, BeiDou |
| Correction data links | Radio / network RTK |
| CANAMEK-listed hydraulic interface | Electro-hydraulic proportional control |
| DC100 platform interface options | Valve, relay and CAN bus; machine- and configuration-dependent |
| DC100 platform GNSS layouts | Dual-mast and mastless; installation-dependent |
| Core System | Base station included; SKU CNMK-DPC-1079 |
| RTK Ready | Base station and hydraulic valve included; SKU CNMK-DPR-1077 |
| Turnkey System | Base station, hydraulic valve and product installation included; SKU CNMK-DPT-1078 |
| Warranty | 2 years |
| After-sales support | 7 days a week |
The following ratings apply to the supplied DC100 components. Each component’s electrical and environmental limits apply separately.
Control Terminal
| Specification | Value |
|---|---|
| Dimensions | 11.18 × 7.44 × 0.89 in / 284 × 189 × 22.5 mm |
| Display size | 10.1 in / 256.5 mm |
| Display resolution | 1920 × 1200 |
| Brightness | Approximately 219 foot-lamberts / 750 cd/m² |
| Processor | Octa-core, 2.2 GHz |
| RAM | 8 GB |
| Storage | 128 GB ROM |
| Power supply | 7–30 V DC |
| Wi-Fi | 802.11 b/g/n; 2.4 GHz |
| Bluetooth | Bluetooth 5.0 with BLE |
| Cellular | 4G LTE; one SIM card slot |
| Battery | Built-in, non-removable lithium battery; 10,000 mAh / 3.8 V |
| Operating temperature | −4°F to +140°F / −20°C to +60°C |
| Storage temperature | −22°F to +158°F / −30°C to +70°C |
| Ingress protection | IP68 |
Terminal Interfaces
| Interface | Quantity / Specification |
|---|---|
| USB Type-C | 1 |
| USB 2.0 | 1 |
| Headphone jack | 1; 0.138 in / 3.5 mm |
| TF card slot | 1 |
| 4G SIM card slot | 1 |
| DC power input | 1 |
| RS-232 | 1 |
| RJ45 | 1 |
Control Box
| Specification | Value |
|---|---|
| Dimensions | 7.87 × 6.10 × 2.48 in / 200 × 155 × 63 mm |
| Communication | Wi-Fi, Bluetooth, Ethernet |
| Power supply | 9–36 V DC |
| Status indicators | Power, GNSS, radio, Wi-Fi, Bluetooth |
| Operating temperature | −40°F to +140°F / −40°C to +60°C |
| Storage temperature | −40°F to +185°F / −40°C to +85°C |
| Ingress protection | IP67 |
GNSS Antenna
| Specification | Value |
|---|---|
| Frequency coverage | Multi-constellation, full-band GNSS |
| Passive antenna gain | ≥5.5 dBi |
| Polarization | RHCP — right-hand circular polarization |
| Horizontal coverage | 360° |
| Output impedance | 50 Ω |
| Passive antenna VSWR | ≤2.0 |
| LNA active gain, L1 | 38 ± 2 dB |
| LNA active gain, L2 | 40 ± 2 dB |
| LNA noise figure | ≤2 dB |
| LNA VSWR | ≤2.0 |
| Operating voltage | 3.3–5.8 V |
| Operating current | ≤45 mA |
| Operating temperature | −49°F to +185°F / −45°C to +85°C |
| Storage temperature | −67°F to +185°F / −55°C to +85°C |
| Humidity | Up to 95%, non-condensing |
| Mechanical feature | Anti-vibration antenna design |
IMU Sensor
| Specification | Value |
|---|---|
| Function | Blade positioning and orientation feedback |
| Resolution | <0.01° |
| Operating voltage | 9–36 V DC |
| Output frequency | Up to 100 Hz |
| Operating temperature | −40°F to +185°F / −40°C to +85°C |
| Ingress protection | IP67 |
DC100 Hydraulic Valve
| Specification | Value |
|---|---|
| Package inclusion | Included in RTK Ready and Turnkey System |
| Dimensions | 9.96 × 7.56 × 2.24 in / 253 × 192 × 57 mm |
| Rated flow | 5.28 US gal/min / 20 L/min |
| Rated pressure | Approximately 725 psi / 50 bar |
| Rated voltage | 24 V DC |
| Ingress protection | IP67 |
These ratings apply to the supplied DC100 control valve. Integration must suit the dozer’s hydraulic circuit; the ratings do not describe the capacity or pressure of the complete machine hydraulic system.
Radio Antenna and Cabling
| Specification | Value |
|---|---|
| Radio antenna frequency range | 410–470 MHz or 902–928 MHz, according to configuration |
| Radio antenna gain | 2 ± 0.5 dBi |
| Radio antenna cable length | 14.76 ft / 4.5 m |
| Platform cable cold-temperature claim | Down to −40°F / −40°C; component operating limits still apply |
Software and Connected Functions
| Function | Specification / Scope |
|---|---|
| Design-file formats | DXF, LandXML, DWG |
| On-site design setup | Slopes, depths and elevations |
| Coordinate systems | More than 6,000 EPSG coordinate systems and custom presets |
| Visualization | Real-time 3D visual guidance, task visualization and construction-result display |
| Project coordination | Planning and dispatch through the Digital Construction platform, where configured |
| Remote monitoring | Machine status and team progress through the applicable connected service |
| Remote diagnostics | Cloud diagnostics with the required connectivity and service configuration |
| Software updates | OTA updates with the required connectivity and service configuration |
Where it earns its keep
Road Subgrade Construction
Use a compatible design model to control blade position while preparing the road subgrade. The system follows the required elevation and slope as the operator moves material along the work area.
Construction-Site Preparation
Grade a construction area to defined levels or slopes using imported design data or on-site surface settings. Live visualization helps the operator relate the current work to the target profile.
Industrial-Site Grading
Prepare industrial yards and development areas where a dozer must follow a coordinated surface design. Automatic blade control supports the specified elevations across the grading task.
Mining Roads and Infrastructure
Grade roads and infrastructure areas at mining sites using GNSS positioning and automatic blade control. The operator works against the selected project model while supervising material movement and machine operation.
Airport and Port Earthworks
Use the system for dozer earthworks and surface preparation within airport or port construction projects. Blade control follows the applicable design profile during the grading stage.
Park and Campus Construction
Shape construction surfaces for parks and campuses using defined elevations and slopes. The digital reference supports grading across the areas assigned to the dozer.
Bulk Earthmoving and Surface Finishing
Use the same project reference while moving material and working toward the required finished surface. Automatic and manual modes allow the operator to choose the appropriate blade-control method for the task.
Be the first to review this product.
Ready to deploy.
Out of the case.
Every unit ships with everything needed to put it to work in under an hour.
- Full system unit
- Mounting hardware
- Power cable + charger
- Hard transit case
- Quick-start guide + warranty card
Build the full system
Get sizing help and tech answers from a real human, in <2 min.
Call +1 (855) CANAMEKTell us your acreage and crop, get a turnkey estimate in 24 hours.
Email sales →
Write a review