Need an answer right away? The answer you're looking for may be here.
Both have the same functions. The only difference is that the MD305 is longer than the MD205 by 4 inches, giving it a longer reception window for receiving the laser beam.
We normally suggest manual control for users who don't operate the system frequently and have a smaller job volume, where time is not a critical factor. However, if you have a large farm, having the power mast will help in time saving — you won't need to stop the tractor and come down to adjust the receiver.
Adjustments depend on the oil flow in your hydraulic system, the size of the cylinder piston, and the cylinder's position relative to the blade. Distance from the laser also matters — being too far causes more vibration in the air, so you'll need to slow movement down or widen the receiver's dead band. You can adjust raise/lower speed using the flow control on your oil hose or through the control box menu.
Refer to the user manual — there are three settings in the menu for adjusting up/down speed. You may also need to mechanically change the oil flow, as the control box settings alone may not be sufficient.
Of course. Anything that moves up/down — especially using hydraulic cylinders — we can manage the elevation.
Yes. Our DUAL SMART Laser Control System runs 2 valves: one for the up & down of the blade and one for the tilt function — or one for the right side and one for the left, depending on the blade mechanism.
We cover all the import charges in the US.
No. You need all CANAMEK components of a system to achieve ideal performance.
Yes. The CANAMEK Laser Control System works with all Rotary Laser Transmitters.
No. The Control Box to Valve cable is already included in the package.
Yes. We have a solution with valve included.
When adding a valve to the bucket, the tractor model doesn't matter — the valve we offer will work on all tractors.
Yes. The Receiver can work manually.
Yes, we have a control system suitable for your dozer. We have a solenoid valve as well.
Yes. You can get our control system with our lasers and tripod all together, and connect our control box to the plow's up/down cylinder through a solenoid valve. The Power Mast we offer lets you adjust the cut accurately and see the offset on the control box LCD.
Yes. This system supports your needs on tiling and ditching machines.
Yes. It works with an actuator.
Yes. Our systems work with all implements and tractors when the implement moves up/down via a solenoid valve or electric actuator.
Yes. Our systems work with any tractor.
Yes, definitely. Our Laser Control Systems can match your Laser Transmitter.
We can offer both Laser Control Systems and GNSS/GPS Systems. GPS is more flexible, works over a larger range, and has a 3D display. Depending on your budget, we can offer either.
Yes. Use the black button on the top right. There are 3 levels of accuracy.
