ACTU-Blade Laser Automated Box Blade Control Kit

The ACTU-Blade Laser Automated Box Blade Control Kit combines the CANAMEK Gold-CAN laser control system with the physical ACTU-Blade box blade. It provides the machine-control electronics and grading implement for following a rotary laser reference during field leveling, surface drainage preparation, property grading and compatible construction work.

A separately supplied red-beam rotary laser establishes the reference plane. The MD205-CAN receiver detects the blade’s position relative to that plane and sends grade information to the CP210-CAN control panel. Operators can use Manual mode for visual guidance or Automatic mode to command blade raising and lowering through a compatible hydraulic solenoid-valve installation.

This laser box blade control system uses the same grading implement offered with the ACTU-Blade GPS Automated Box Blade Control Kit. The laser package pairs that implement with Gold-CAN electronics. Its grading reference, operating controls and specifications therefore follow the Gold-CAN platform.

The kit is intended for farmers, property-grading operators and contractors who require both a box blade and laser-based elevation control. Choose the blade width for the intended machine and work area, then specify the external laser, mounting arrangement and hydraulic connections needed for the installation.

Complete Laser Box Blade Grading Workflow

The system follows a direct sequence from laser reference to blade adjustment:

1. Establish the reference. Position a compatible rotary laser on suitable support and set the required reference elevation. Level, single-slope or dual-slope operation depends on the transmitter selected.
2. Set the receiver position. Secure the MD205-CAN to an appropriate machine or implement mounting arrangement and establish its relationship to the box blade’s working elevation.
3. Configure Gold-CAN. Select Manual or Automatic operation, choose the control tolerance and set the independent raise/lower response for the hydraulic installation.
4. Detect grade position. The receiver identifies the laser beam position and sends the information to the control panel through its wired CAN connection.
5. Adjust the blade. Follow the indicators with operator-controlled hydraulics in Manual mode, or use the controller’s valve commands in Automatic mode.
6. Monitor the grading pass. Check grade indications, blade direction and system status while controlling machine travel and material movement.

The operator establishes the grading objective and laser setup. Gold-CAN supplies continuous elevation feedback and the blade-control commands used to follow that reference.

Choose the Box Blade Width

4 ft / 1.22 m Box Blade

The narrowest listed ACTU-Blade option provides a compact working width. Select it where the machine and project call for a narrower grading implement.

5 ft / 1.52 m Box Blade

The intermediate width provides a choice between the smaller and larger ACTU-Blade configurations. Selection should account for the machine, intended grading area and material-handling requirements.

6 ft / 1.83 m Box Blade

The widest listed option increases the available blade width for each pass. Confirm that the machine, mounting arrangement and hydraulic installation suit the selected implement and working conditions.

Included Control Equipment and Separate Installation Requirements

The package combines one box blade in the selected width with the Gold-CAN control system. The documented MD205-CAN configuration comprises the CP210-CAN control panel, one MD205-CAN laser receiver, and the Gold-CAN power, receiver and valve cables.

A compatible rotary laser and suitable transmitter support are required separately. Automatic control also requires compatible hydraulic solenoid-valve equipment, hydraulic connections and machine-specific mounting. The electrical valve cable connects the controller to the valve; it does not supply the hydraulic valve or hoses.

The PM400-CAN power mast and RS100-CAN wired remote are optional Gold-CAN accessories. Neither is part of this blade-and-control-system bundle.

Automatic Hydraulic Blade Height Control

In Automatic mode, the CP210-CAN processes the receiver’s grade information and commands a compatible on/off solenoid valve to raise or lower the box blade. The corrections move the receiver toward the selected on-grade band as the machine travels across the work area.

This configuration provides blade elevation control from one laser receiver. The operator remains responsible for machine travel, material handling and monitoring the grading operation.

Automatic elevation corrections can reduce repeated manual blade inputs. Performance depends on a correctly established laser reference, secure receiver mounting, suitable hydraulics and response settings matched to the machine.

Manual Guidance and Clear Grade Indication

Manual mode leaves hydraulic adjustment with the operator while maintaining the laser grade reference on the receiver and control-panel indicators. It supports setup, checking and grading tasks where the operator wants direct control of blade movement.

The receiver uses three colors to identify its position:

• Red: above grade.
• Green: on grade.
• Yellow: below grade.

High-visibility flashing LEDs, eight beam-detection positions and the CP210-CAN display help the operator monitor elevation and blade-control status. The system also provides lost-laser indication and can show the last detected beam position.

Selectable Control Tolerances

Gold-CAN provides three selectable control bands:

A narrower band sets a tighter on-grade tolerance. A wider band allows more variation around the reference before the position is treated as outside the selected band. Choose the setting together with the hydraulic response and the requirements of the grading task.

These figures describe the control system’s selectable tolerances. Finished-surface accuracy also depends on the transmitter, installation, hydraulic response, machine movement and working conditions.

360° Laser Reception and Signal Processing

The MD205-CAN receiver captures the rotary laser from any direction around its 360° reception field. Its 7.48 in / 190 mm measurement window provides the detection area used to identify above-grade, on-grade and below-grade positions.

Real-time laser bounce filtration and adjustable signal smoothing help stabilize the grade information during machine vibration and movement. The receiver uses a mechanical clamp mount and combines CAN data communication with its power connection.

The aluminum-alloy receiver body is rated IP68. The CP210-CAN control panel is rated IP66. These component ratings support use in agricultural and grading environments exposed to dust and moisture.

Level and Sloped Laser References

The kit can follow a level, single-slope or dual-slope laser reference when the external transmitter provides the required capability. A horizontal plane supports level grading; a slope-capable transmitter allows the reference to follow the planned surface fall.

Slope values and optical working range are determined by the selected transmitter. They are not fixed specifications of this bundle, because a transmitter is supplied separately.

A dual-slope laser defines the reference plane in two directions. The included Gold-CAN configuration still controls blade raising and lowering from one receiver; independent automatic control of both blade ends requires a different control configuration.

Independent Raise and Lower Response Adjustment

Hydraulic behavior varies with valve characteristics, machine pressure and flow, implement loading and the installed circuit. The CP210-CAN allows raise and lower response to be adjusted independently from 20 to 100 through its menu.

Separate settings allow each direction to be tuned to the machine. During commissioning, establish the correct blade movement direction, receiver-to-blade relationship and response before using Automatic mode for grading.

The control panel and receiver operate on 12–24 V DC. The documented hydraulic interface provides a 12 V DC valve-control output, so the valve and wiring must match that output as well as the hydraulic requirements of the machine.

Optional Receiver-Height Adjustment and Survey Mode

The PM400-CAN electric power mast adds receiver-height adjustment from the CP210-CAN. It provides 39.37 in / 1,000 mm of travel, digital position measurement and stated positioning accuracy of ±0.04 in / ±1 mm.

When this optional mast is installed and configured, Gold-CAN’s Survey mode supports checking high and low areas relative to a selected reference point. This can assist with relative elevation and slope checks before or during grading.

Survey operation depends on the optional mast configuration. The supplied box blade and standard receiver arrangement provide the core grading package.

Maintain Planned Surface Grades

Uneven elevations can interrupt a planned fall toward a drainage outlet or complicate irrigation preparation. A correctly configured slope-capable transmitter establishes the required reference, and Gold-CAN helps the operator guide the box blade along that plane.

This can support more consistent surface shaping for drainage and water distribution. Results depend on the grading design, outlet conditions, soil, weather and execution of the work.

For construction and property grading, the same reference-based process supports repeatable blade elevation across compatible level or sloped work areas.

Reduce Repeated Manual Blade Corrections

Following grade manually requires the operator to watch elevation and repeatedly adjust the hydraulic controls. Automatic mode uses live receiver information to generate those raise/lower commands, while adjustable response settings allow the corrections to suit the installation.

The operator can concentrate on machine travel, material distribution and system monitoring while retaining access to Manual mode. The optional RS100-CAN wired remote provides additional blade up/down and Manual/Automatic controls through the CP210-CAN remote connection.

CAN Connectivity, Diagnostics and Support

Gold-CAN uses wired CAN communication between compatible components. Dedicated receiver, power and valve connections organize the installation, while application-specific keyed connectors help reduce incorrect connections.

The industrial cable system uses oil-resistant jackets, construction intended for mechanical stress and low-temperature operation, and water- and dust-resistant circular MIL-style connectors.

The CP210-CAN provides a backlit display, a receiver-communication warning and short-circuit protection. Its menus include tolerance selection, valve response, mast type, measurement units, signal smoothing and an optional Automatic-mode buzzer. Software version, serial number and active/inactive time counters are available for system identification and operating checks.

CANAMEK provides after-sales support seven days a week for configuration and operating assistance. The kit includes a two-year free warranty.

Solutions for Laser Box Blade Grading

ACTU-Blade Laser brings the grading implement and elevation-control equipment together for jobs that can be completed against a rotary laser reference. Applications include agricultural field leveling, irrigation preparation, surface drainage grading, farm-road work, yard grading and construction finish grading.

The selected blade width, machine installation and transmitter determine how the package is applied to a particular project. Contact CANAMEK to review the machine model, attachment arrangement, hydraulic circuit and intended grading work.

Commercial Package Benefits

• Box blade and control system together: the selected ACTU-Blade implement is supplied with Gold-CAN machine control.
• Three blade widths: select 4 ft / 1.22 m, 5 ft / 1.52 m or 6 ft / 1.83 m for the application.
• Manual and Automatic operation: use visual grade guidance or compatible hydraulic blade control.
• Documented expansion options: add PM400-CAN receiver-height adjustment or the RS100-CAN wired remote when required.
• CANAMEK ownership support: Made in Canada, with a 2-Year Free Warranty and After-Sales Support, 7 Days a Week.

Key Features at a Glance

• Gold-CAN laser control system with an included ACTU-Blade box blade.
• Blade widths of 4 ft / 1.22 m, 5 ft / 1.52 m and 6 ft / 1.83 m.
• CP210-CAN control panel and one MD205-CAN laser receiver.
• Manual visual guidance and Automatic hydraulic raise/lower control.
• Compatibility with a separate red-beam rotary laser reference.
• Level, single-slope or dual-slope reference following, according to transmitter capability.
• Selectable tolerances of ±0.12 in / ±3 mm, ±0.35 in / ±9 mm and ±0.55 in / ±14 mm.
• 360° reception, a 7.48 in / 190 mm detection window and eight beam positions.
• Above-grade, on-grade and below-grade LED indications.
• Laser bounce filtration and adjustable signal smoothing.
• Independent raise/lower response settings from 20 to 100.
• Wired CAN communication and dedicated machine connections.
• IP66 controller, IP68 receiver and 12–24 V DC component supply.
• Receiver-communication monitoring and short-circuit protection.
• Optional PM400-CAN electric power mast with Survey-mode support.
• Optional RS100-CAN wired blade-control remote.
• Two-year warranty and after-sales support seven days a week.

Why Choose the ACTU-Blade Laser Automated Box Blade Control Kit?

The kit pairs the physical grading implement with the receiver and controller needed for laser-based elevation control. It suits buyers who want an ACTU-Blade box blade operated from a rotary laser reference, with clear Manual guidance and automatic raise/lower capability through compatible hydraulics.

For agricultural operators, the package supports field leveling and planned surface shaping for irrigation and drainage. For grading contractors and property operators, it provides a configurable blade-and-control combination for compatible road, yard and site work.

The purchase decision centers on blade width, machine fit and the external laser and hydraulic equipment required for the job. Gold-CAN’s selectable tolerances, response settings and optional accessories allow the installation to be configured around those requirements.

Frequently Asked Questions

What is the ACTU-Blade Laser Automated Box Blade Control Kit?

It is a laser box blade control system combining CANAMEK Gold-CAN machine-control equipment with an included ACTU-Blade box blade. It provides Manual grade guidance and Automatic blade raise/lower control through compatible hydraulics, using a separate rotary laser reference.

How does the laser version differ from the ACTU-Blade GPS kit?

The laser version combines the same physical box blade with Gold-CAN laser control. It does not include the GPS kit’s GNSS receiver, touchscreen terminal, Vehicle Control Unit or GPS surveying and terrain-design software. Blade elevation is referenced to a compatible rotary laser.

What is included in this bundle?

The bundle includes one ACTU-Blade box blade in the selected width and the Gold-CAN laser control system. The documented configuration uses a CP210-CAN control panel, one MD205-CAN receiver, and Gold-CAN power, receiver and valve cables.

What blade widths are available?

The available box blade widths are 4 ft / 1.22 m, 5 ft / 1.52 m and 6 ft / 1.83 m. Choose the width according to the machine, mounting arrangement, work area and grading requirements.

Does the package include a rotary laser transmitter or tripod?

No. This bundle combines the Gold-CAN control system and ACTU-Blade box blade. A compatible red-beam rotary laser transmitter and suitable transmitter support are required separately.

Are the hydraulic valve and hoses included?

No additional hydraulic valve or hose package is included in the defined blade-and-Gold-CAN bundle. Automatic operation requires a compatible valve installation and hydraulic connections. The Gold-CAN valve cable provides the electrical connection to the valve.

Are the PM400-CAN power mast and RS100-CAN remote included?

No. Both are optional accessories. The PM400-CAN adds powered receiver-height adjustment and the documented Survey-mode configuration. The RS100-CAN is a wired remote for blade Up/Down and Manual/Automatic controls.

How does Automatic mode control the box blade?

The MD205-CAN detects its position relative to the rotary laser plane and sends the information to the CP210-CAN. The controller commands a compatible hydraulic solenoid valve to raise or lower the blade toward the selected on-grade band. The operator controls machine travel and material handling.

Can I operate the system manually?

Yes. Manual mode displays laser grade information while the operator controls the hydraulics. Red indicates above grade, green indicates on grade and yellow indicates below grade.

Does this configuration automatically control blade tilt?

The documented Gold-CAN configuration provides raise/lower control using one laser receiver. Independent automatic blade-tilt or left/right blade-end control is not part of this configuration.

Can it follow level, single-slope and dual-slope references?

Yes, according to the capability of the separate rotary laser transmitter. Gold-CAN follows the selected laser plane. A dual-slope reference does not add independent automatic control of both blade ends to the single-receiver configuration.

What accuracy settings are available?

The selectable control tolerances are ±0.12 in / ±3 mm, ±0.35 in / ±9 mm and ±0.55 in / ±14 mm. These are control-band settings. Actual finished-surface accuracy also depends on the transmitter, installation, hydraulic response and working conditions.

What laser transmitter can I use?

Gold-CAN is designed for compatible red-beam rotary laser transmitters. Select a transmitter with the range and level or slope capabilities required for the project. Transmitter specifications are separate from the control-system specifications.

What is the working range of the kit?

The bundle has no single specified optical working range because a laser transmitter is not included. Usable range depends on the selected transmitter, receiver compatibility, beam visibility and site conditions.

Will the box blade fit my machine?

Fit must be checked against the machine model, attachment arrangement, selected blade width and hydraulic installation. Contact CANAMEK with those details before ordering so the appropriate mounting and control configuration can be specified.

What hydraulic interface does Gold-CAN require?

Automatic operation uses compatible on/off hydraulic solenoid valves. The published valve-control output is 12 V DC. Valve selection must also match the machine’s hydraulic pressure, flow, cylinder arrangement and required connections.

Can the raise and lower response be adjusted separately?

Yes. The CP210-CAN allows each direction to be adjusted independently from 20 to 100. The settings are used to match blade response to the installed valve, hydraulic circuit and machine.

Can the system survey high and low areas?

Yes, when the optional PM400-CAN electric power mast is installed and configured for Survey mode. This supports relative elevation checks against a selected reference. The mast is supplied separately from this bundle.

Does the kit create digital terrain designs or calculate cut-and-fill volumes?

No GPS terrain-design or cut-and-fill calculation platform is included. Gold-CAN operates from the external laser reference. The GPS kit’s digital survey, design, project-file and reporting functions are outside this package.

Does it require a GNSS base station or correction service?

No. Grade detection uses a compatible rotary laser and the MD205-CAN receiver. The Gold-CAN workflow does not use a GNSS base station or satellite correction service.

What electrical supply is required?

The CP210-CAN control panel and MD205-CAN receiver operate on 12–24 V DC. The published valve-control output is 12 V DC. The optional PM400-CAN mast has its own 10–24 V DC supply rating.

Is the receiver connection wireless?

No. The MD205-CAN communicates with the controller through a wired CAN data and power connection. The optional RS100-CAN blade-control remote is also wired.

What environmental ratings apply?

The CP210-CAN control panel is rated IP66 and the MD205-CAN receiver is rated IP68. Gold-CAN’s published operating-temperature range is −4°F to 140°F / −20°C to 60°C. These ratings apply to the named control-system components.

What happens if the laser signal or receiver connection is lost?

The system provides lost-laser position indication and can show the last detected beam position. The CP210-CAN also displays a warning when receiver communication is interrupted. The operator should check the reference, beam path and connections before continuing grading.

What setup is needed before automatic grading?

Install and secure the box blade, receiver, controller and compatible hydraulic equipment. Establish the laser reference and receiver-to-blade relationship, then check wiring, blade movement direction, control tolerance and hydraulic response before using Automatic mode.

What warranty and support are provided?

The kit includes a 2-Year Free Warranty and CANAMEK After-Sales Support, 7 Days a Week.

Where is the system made?

ACTU-Blade Laser is a CANAMEK Made in Canada product combining the Gold-CAN control system with the ACTU-Blade box blade.