El Canamek X70 3D Excavator Guidance System<\/strong> brings high-precision GNSS positioning, real-time machine posture tracking, digital design data, and intelligent excavation guidance directly into the excavator cab. Designed for professional earthmoving, construction, grading, trenching, mining, roadwork, and water-engineering applications, the X70 helps operators excavate accurately to the required design surface while reducing unnecessary rework and over-excavation.<\/p>\n With excavation guidance accuracy of up to \u00b13 cm<\/strong>, the Canamek X70 continuously tracks the excavator’s position and machine geometry while displaying clear real-time digging guidance on a rugged 10.1-inch field display. Operators can compare the actual bucket position against the project design directly from the cab, helping them maintain the required elevation, depth, slope, and excavation profile throughout the job.<\/p>\n The underlying source system specifies \u00b13 cm guidance accuracy and real-time machine posture tracking with on-screen excavation guidance.<\/p>\n The Canamek X70 uses multiple IMU sensors to monitor the excavator body, boom, arm, and bucket. With data output up to 100 Hz<\/strong>, the system continuously calculates the machine’s 3D posture and joint angles, giving the operator an accurate real-time representation of the working equipment.<\/p>\n This full-machine awareness allows the X70 to provide precise bucket guidance throughout the excavation cycle instead of relying only on the position of the excavator itself.<\/p>\n An integrated Electronic Fence<\/strong> function can also be configured to generate voice warnings when predefined boundaries are approached, helping reduce the risk of collisions and excessive excavation.<\/p>\n The brochure specifically describes IMUs on the machine body, boom, arm and bucket delivering 100 Hz real-time 3D posture and joint-angle data together with customizable electronic fences and voice alerts.<\/p>\n At the core of the Canamek X70 is a multi-constellation GNSS positioning system with 1408 channels<\/strong> and support for multiple correction methods including NTRIP, Base Station RTK and PPP<\/strong>.<\/p>\n The system supports multiple GNSS constellations and frequency bands, providing the positioning foundation required for demanding excavation and grading applications.<\/p>\n For project setup, the X70 supports both RTK-based calibration and total-station calibration workflows<\/strong>. The source system also provides a rover-based RTK calibration method designed to reduce reliance on a total station and complete calibration in approximately 30 minutes, while the total-station workflow provides a guided five-step calibration procedure.<\/p>\n The Canamek X70 allows project design information to move from the office directly into the excavator.<\/p>\n It supports commonly used construction, CAD and geospatial file formats including:<\/p>\n DWG, DXF, SHP, KML and XML<\/strong><\/p>\n Multi-layer project support makes complex drawings easier to manage by allowing operators to clearly view different design layers on the field display.<\/p>\n With 6,000+ predefined coordinate systems<\/strong>, the X70 can also be configured for projects in different regions without requiring users to manually build coordinate-system definitions for every job.<\/p>\n Both the 6,000+ coordinate-system library and DWG\/DXF\/SHP\/KML\/XML multi-layer support are listed in the product brochure.<\/p>\n The Canamek X70 includes a rugged central display engineered for demanding construction environments.<\/p>\n El 10.1-inch, 1920 \u00d7 1200 display<\/strong> delivers up to 750 cd\/m\u00b2 brightness<\/strong> for improved visibility in outdoor working conditions. The display is rated IP68<\/strong> and incorporates an octa-core processor, 8 GB RAM, 128 GB storage, Wi-Fi, Bluetooth, cellular connectivity and multiple wired interfaces.<\/p>\n This provides operators with a durable in-cab platform for viewing machine position, project design data and excavation guidance throughout the working day.<\/p>\n The X70 is designed to connect machine operations with project-management workflows.<\/p>\n Cloud-device integration supports functions such as device management, project monitoring and cross-team collaboration<\/strong>, allowing project information to move more efficiently between the construction site and the office.<\/p>\n Project teams can monitor machine information and project progress while field and design data can be synchronized to help keep operators, surveyors and project managers working from consistent project information.<\/p>\n The brochure describes real-time machine location\/status, project progress and resource monitoring, schedule\/risk tracking, and synchronization of design and field data through the cloud.<\/p>\n The Canamek X70 is engineered for professional construction environments with IP67-rated control and IMU modules<\/strong> and an IP68 central display<\/strong>.<\/p>\n The platform can also be configured for water-construction and dredging applications. The source system describes IP67\/IP68-rated components, roof-mounted GNSS antenna configurations and an amphibious equipment option for demanding dredging environments.<\/p>\n By combining GNSS positioning, RTK corrections, real-time 3D machine tracking and digital project designs, the Canamek X70<\/strong> gives excavator operators continuous guidance toward the intended finished surface.<\/p>\n Instead of repeatedly stopping excavation to manually check grade, operators can see the bucket’s relationship to the design while they work. This makes the X70 particularly valuable on projects requiring consistent depth, slope, elevation or complex 3D excavation geometry.<\/p>\n Whether the job involves precision trenching, highway earthworks, mine development, bridge construction, landscape shaping or water infrastructure, the Canamek X70 3D Excavator Guidance System<\/strong> provides the positioning and machine-awareness tools required for more controlled excavation.<\/p>\n El Canamek X70<\/strong> is a 3D excavator guidance system that combines GNSS\/RTK positioning, machine-mounted IMU sensors, digital project designs and an in-cab display to provide real-time excavation guidance and machine posture information.<\/p>\n The system provides excavation guidance accuracy of up to \u00b13 cm<\/strong>. The GNSS specifications also list RMS positioning accuracy of 0.8 cm + 1 ppm horizontally<\/strong> y 1.5 cm + 1 ppm vertically<\/strong> under the specified positioning configuration.<\/p>\n The X70 supports DWG, DXF, SHP, KML and XML<\/strong> files, allowing operators to work with common CAD, construction and geospatial project data.<\/p>\n Yes. The X70 supports NTRIP, Base Station RTK and PPP<\/strong> GNSS connection methods. The system also supports an RTK-based calibration workflow.<\/p>\n Not necessarily. The source platform supports both RTK rover-based calibration and traditional total-station calibration. The RTK workflow is designed to allow calibration without relying on a total station in supported configurations.<\/p>\n The source system specifies that its rover-based RTK calibration workflow can be completed in approximately 30 minutes<\/strong>. Total-station calibration uses a guided five-step workflow.<\/p>\n The system provides access to more than 6,000 predefined coordinate systems worldwide<\/strong>, helping simplify setup across different regions and project locations.<\/p>\n Yes. IMU sensors track the machine body, boom, arm and bucket, providing real-time 3D posture and joint-angle information at output frequencies of up to 100 Hz<\/strong>.<\/p>\n Electronic Fence allows predefined working boundaries to be configured around the machine’s operating environment. The system can provide voice alerts when those boundaries are approached, helping reduce collision risk and over-excavation.<\/p>\n The platform is designed to support water-construction and dredging environments. The source configuration includes IP67\/IP68-rated components and supports configurations such as a roof-mounted GNSS antenna and amphibious equipment.<\/p>\n The X70 uses a 10.1-inch, 1920 \u00d7 1200 rugged display<\/strong> with brightness up to 750 cd\/m\u00b2 and an IP68 environmental rating.<\/p>\n Yes. The central display supports Wi-Fi, Bluetooth 5.0 BLE and multiple 2G\/3G\/4G cellular standards. The control module also supports Wi-Fi, Bluetooth and Ethernet.<\/p>\n Yes. Cloud-device integration supports device management, project information and synchronization of field and design data, helping coordinate workflows between machines, site personnel and office teams.<\/p>\n The brochure lists dedicated Tilt Bucket<\/strong> y Swing Arm \/ Offset Arm<\/strong> accessory kits for supported machine configurations.<\/p>\n The FAQ answers above reflect the published feature set and technical brochure rather than adding capabilities that are not documented.<\/p>","protected":false},"excerpt":{"rendered":"Real-Time Full-Machine 3D Guidance<\/h3>\n
Precision GNSS & RTK Positioning<\/h3>\n
Work Directly From Digital Design Files<\/h3>\n
Rugged 10.1-Inch Field Display<\/h3>\n
Connected Construction Workflow<\/h3>\n
Built for Challenging Excavation Environments<\/h3>\n
Reduce Rework and Dig With Confidence<\/h3>\n
Preguntas frecuentes<\/h1>\n
What is the Canamek X70?<\/h3>\n
How accurate is the Canamek X70?<\/h3>\n
Which design file formats does the Canamek X70 support?<\/h3>\n
Does the Canamek X70 support RTK?<\/h3>\n
Does the X70 require a total station for calibration?<\/h3>\n
How long does RTK calibration take?<\/h3>\n
How many coordinate systems does the X70 support?<\/h3>\n
Does the Canamek X70 track the complete excavator?<\/h3>\n
What is the Electronic Fence feature?<\/h3>\n
Is the Canamek X70 suitable for dredging?<\/h3>\n
What type of display does the X70 use?<\/h3>\n
Does the X70 support mobile and wireless connectivity?<\/h3>\n
Can the X70 connect field operations with the office?<\/h3>\n
Does the X70 support tilt buckets and offset-boom excavators?<\/h3>\n
\n